Description
The AM1730-BEND-SP is the AM1730 in 90 degree bend form with the SP termination option and NIST-traceable calibration. Additel AM17xx secondary reference PRTs are platinum resistance thermometers used as working standards in temperature calibration. Each probe has a 1/4 in sheath and a platinum element in 100 ohm or 25 ohm form, available straight in 12 or 20 inch lengths or with a 90 degree bend for horizontal wells. Units are supplied with a traceable calibration, and -17025 versions carry an ISO/IEC 17025 accredited calibration. Labs use them as the reference sensor in baths and dry-block calibrators.
Key features
- Platinum sensing element, 100 Ω or 25 Ω by model
- 1/4 in sheath diameter
- Straight 12 in or 20 in lengths, or 90 degree bent versions
- Traceable calibration, ISO/IEC 17025 accredited option
- Suitable for ITS-90 or CVD characterization
Typical applications
- Reference sensor for dry-block and bath calibration
- Comparison calibration of RTDs and thermocouples
- Working standard in accredited calibration labs
- Horizontal or tight-access wells with bent probes
Specifications
| Brand | Additel |
|---|---|
| Model | AM1730 |
| Order code | AM1730-BEND-SP |
| Product type | Secondary reference platinum resistance thermometer |
| Nominal resistance | 100 Ω |
| Temperature range | -200 °C to 420 °C |
| Probe form | 90 degree bend |
| Calibration | Traceable (NIST) |
| Termination option | SP |
| Sensor | Platinum resistance element |
| Sheath diameter | 1/4 in |
Reviews
There are no reviews yet.